FM Stereo Receiver Let's begin by soldering a three-pin ceramic filter to the PCB. These three pins will be coming from terminals #11, #12 and #13 of the TEA5711T chip. Next, solder another three-pin ceramic filter to the PCB. These three pins will be coming from terminals #7, #8 and #9 of the TEA5711T chip. Once that is done, continue with another three-pin ceramic filter by snipping off the center pin on the ceramic filter. Then go ahead and solder it to the PCB. This filter will be coming from terminals #5 and #6 of the TEA5711T chip. |
<----ads---->
Next
« Prev Post
« Prev Post
Previous
Next Post »
Next Post »